Results 1 to 2 of 2
Thread: -
Hybrid View
-
29th November 2007 10:51 #1
-
DVD-R-, .
, firmware,
, .
, ?
, exe ? ?
:
, / ?/ ?Code:Example on using Binflash First of all scan your adapters for valid devices: C:\>necflash -scan This may lead to an output similar to: Binflash - NEC version - (C) by Liggy and Herrie Visit http://binflash.cdfreaks.com List of supported devices: Device : 1.0.0 Vendor : _NEC Model : DVD_RW ND-2500A Firmware : 1.07 Now you should backup your current firmware by issueing the following command, using the device that you got during the device scan: C:\>necflash -dump C:\OldFirmware.bin 1.0.0 After accepting the disclaimer and waiting for a few seconds you will get the file C:\OldFirmware.bin which contains your current firmware. Now you probably want to update your drive with a new firmware. You can do so simply by calling the following command: C:\>necflash -flash C:\NewFirmware.bin 1.0.0 If you accept the disclaimer and wait for a few seconds again, the burner is updated with the firmware from C:\NewFirmware.bin The following command is used to set the default booktype for DVD+R to DVD-ROM: C:\>necflash -setbt DVD+R DVD-ROM perm 1.0.0 For DVD+R, DVD+RW and DVD+R-DL you can set the booktype to DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW and DVD+R-DL. Instead of using perm you may also use temp if you just want to use the temporary settings that only last until the next drive reset. (This feature is not supported by every firmware)
. booktype.
.
-
29th November 2007 12:40 #2
? firmware , firmware . .exe , . .. .
Last edited by el_barbudo; 29th November 2007 at 12:42. Reason:




Reply With Quote
, ...
5th May 2023, 14:20 in