Results 1 to 7 of 7
Hybrid View
-
14th April 2008 21:37 #1Registered User
Join Date: Apr:2008
Location: SOFIA
Posts: 7
( )?
-
14th April 2008 21:44 #2
-
14th April 2008 21:44 #3Registered User
Join Date: Oct:2003
Location:
Posts: 1,056
20/24- ATX 20/24-pin ATX. .
..
-
14th April 2008 21:46 #4
-
16th April 2008 15:29 #5MSI K9A2 Platinum
| ATHLON64 X2/AM2 4600+ @ 3420MHz [Noctua NH-U12P]
| 4GB Transcend JetRam PC6400 | 200GB ST3200827AS + 320GB WD3201ABYS |
Gigabyte 8800GT 512M Accelero S1 + 120mm Core 700 Mem. 920 Shader 1715 [Turbo Force] | CHIEFTEC GPS 450W | Case
ModReactor.com
-
16th April 2008 14:53 #6



MB : BXcell pc 100 , CPU : Intel Celeron 266 mhz @ 366 mhz , RAM : 64 mb SDRAM , GPU : Nvidia Riva Vanta 8mb , HDD : 21 gb
-
16th April 2008 15:57 #7┌Θ╥☻▄╫
Join Date: Sep:2003
Location: √
Posts: 8,000
- , ATX , . , ( JNC, Delux ). , , :
"Switching power supplies any switching power supplies cannot work under zero load because the energy accumulated in the inductances of the PSUs output circuits (in the transformer or choke, depending on the topology employed) doesnt go into the load, which results in an uncontrollable growth of voltage on the PSU output. The ATX standard, however, requires that the PSU be able to start up without external load, and the manufacturers used to install resistors that provided the necessary minimum of load. Such PSUs worked normally and yielded stable voltages even if nothing at all was connected to them." - http://www.xbitlabs.com/articles/oth...tx-psu6_5.html
FSP - .




Reply With Quote

Lenovo ThinkPad 15 IdeaPad 15
5th May 2023, 22:16 in