Results 1 to 7 of 7
Hybrid View
-
21st August 2008 22:47 #1
. , :
- EPoX 9NDA3I
, Maxtor 40Gb 133 Hitachi 200Gb 133.
, Maxtor-. , 500Gb, S-ATA.
- ( ), 200Gb Primary , .
.
, , Primary partition-a.
50 .
, . P , .
, :
, Primary , . , Partition manager-a, . , , P.Magic 8( ) 200 Primary . , - Primary .Code:Windows Setup must copy some files onto HDD on bus 0, ide 0 on atapi(MBR) There are no compatible partitions for WinXp on this drive Please create a WinXp compatible partition
- , . - IDE - , S-ATA.
- BootRom-a :
( , ) , . . .Code:Disk boot failure, insert system disk and press enter
- Primary partition-a, P.Magic 8 "", "1024 cylinder boundary, and may not be bootable".
1024 , , ?
- ?
, -, - .
, . .
: -. , - IDE , .
. , ...?
Boot disk failure, boot order- .Last edited by Tyrael; 21st August 2008 at 23:04.
-
22nd August 2008 00:29 #2
-
- !!! P.S. -ASUS P5Q-E/INTEL Q6600/2*2048MB CORSAIR 1066/GF 9800GT/WD 500GB BLACK EDITION SATA2/LG H62N SATA/CHIEFTEC CTB-550S/NEC 2170NX
-
22nd August 2008 09:51 #3Registered User
Join Date: Dec:2005
Location: yvr
Posts: 5,167
http://service1.symantec.com/SUPPORT...1?OpenDocument
Originally Posted by dido1403
Situation:
When you try to resize a partition or create a new primary partition, you see the following message:
"Information - This partition crosses the 1024 cylinder boundary and may not be bootable."
Solution:
This message may be important to you if you use a version of Windows prior to Windows 2000. Previous versions of Windows cannot boot if the following are true:
* The primary partition starts past the 1024-cylinder boundary.
* The operating system boot files are placed after the 1024-cylinder boundary.
Note: This does not apply to Windows 2003/XP/2000, because they are not affected by a 1024-cylinder boundary limit.Windows , - NTLDR, NTDETECT.COM BOOT.INI . 3 , - . 2 IDE primary IDE disk.
Originally Posted by dido1403
2 IDE SATA, SATA , . , - .
- IDE , .
Disk Management boot.ini , .
-
22nd August 2008 13:19 #4
- . - . ... -.... ... ...
. 3
.
, , ? ?
: -:
- ( optin) , , .Code:[boot loader] timeout=30 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=AlwaysOff /fastdetect /usepmtimer
1024 . , . - WinXp SP2 integrated, PGM release , ... , , .
. . Undelete- . ..
, . , , ?Last edited by Tyrael; 22nd August 2008 at 13:30.
-
22nd August 2008 13:48 #5Registered User
Join Date: Dec:2005
Location: yvr
Posts: 5,167
Disk Management- control panel-->administrative tools-->computer management-->disk management. Start-->run diskmgmt.msc
- , windows- a - , / . 3- , boot.ini .
Windows Setup primary - - BIOS (HD mode AUTO, LARGE, LBA...), ..
-
25th August 2008 12:32 #6
, - Auto LBA, , , corrupt- .
Auto LBA ?
( , ).
- (disk 0 ) ( ) - , .
-(disk 1, : ; Primary). , - , ?
-
29th August 2008 19:27 #7Registered User
Join Date: Dec:2005
Location: yvr
Posts: 5,167
, , .Auto LBA ?
- , master/slave . . slave.-(disk 1, : ; Primary)




Reply With Quote
R9 280,
07.05.23 ., 21:28 in