Results 1 to 5 of 5
Thread: ?
Hybrid View
-
14th February 2010 17:02 #1
?
? ?
?
:
"" , : (DRDY ERR) error: (UNC) I/O error, dev sda, sector 3515445****
- fsck.ext3, , s.m.a.r.t. :ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 1:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
03 b7 47 2e
sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[56174.076449] ata2: EH complete
sd 1:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
res 51/40:08:1e:47:b7/40:00:13:00:00/e3 Emask 0x9 (media error)
ata2.00: configured for UDMA/133
ata2: EH complete
350 , -, ...smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HDP725025GLA380
Serial Number: *
Firmware Version: *
User Capacity: 250,058,268,160 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sun Feb 14 16:43:01 2010 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (3981) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 66) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 104
3 Spin_Up_Time 0x0007 113 113 024 Pre-fail Always - 169 (Average 191)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1206
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 139 139 020 Pre-fail Offline - 26
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4103
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1206
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1213
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1213
194 Temperature_Celsius 0x0002 222 222 000 Old_age Always - 27 (Lifetime Min/Max 11/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 72
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 335 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 335 occurred at disk power-on lifetime: 4103 hours (170 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 b6 1b cf e3 Error: UNC 8 sectors at LBA = 0x03cf1bb6 = 63904694
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 b6 1b cf e0 08 00:18:01.800 READ DMA EXT
27 00 00 00 00 00 e0 08 00:18:01.800 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 0a 00:18:01.800 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 0a 00:18:01.800 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 00:18:01.800 READ NATIVE MAX ADDRESS EXT
:
-
14th February 2010 18:00 #2
Extended offline self test:
# 1 Extended offline Completed: read failure 30% 4104 332340142
, ... .
-
15th February 2010 17:58 #3Prolemuris
Join Date: Oct:2006
Location: Varna
Posts: 4,296
80- , ( ). ?
-
15th February 2010 20:09 #4
, ...
, fsck debian, I/O error , fsck ubuntu livecd . debian-a smart, hitachi deskstar, , , , ... , :
, 7 .
, , . .
, software raid1 home !!!
http://my.opera.com/treb/blog/hdd-crash-imminent , ...Last edited by Metalqga; 15th February 2010 at 20:30.
-
23rd February 2010 16:38 #5
.
, Seagate ( 250GB) 3 .
debian-a , raid1 !
edit
, (500 )Last edited by Metalqga; 23rd February 2010 at 18:32.




Reply With Quote
windwos 10
5th May 2023, 00:01 in Windows