Results 1 to 4 of 4

Thread: Palomino 12.5

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    engineer PhD Daisy's Avatar
    Join Date: Aug:2001
    Location:
    Posts: 468

    Palomino 12.5

    pin mod 10 12.5 . - .
    13 Palomino (Morgan) , ?
    ECS 780G , AMD ATHLON64 4200+ X2 ,RAM 4x1GB PQI DDR2 800 ,Hitachi 500Gb, ATI TV Wndr, Fortron Blue Storm II 400W

  2. #2
    Registered User RuEv's Avatar
    Join Date: Apr:2002
    Location: .
    Posts: 291
    . , Palomino 1500+ .
    ? ?
    EPoX 8RDA+ Rev. 2.1 | AthlonXP 1800+@2075MHz[DUT3C JIUHB0310] | Thermaltake Volcano 7+ | A-Data PC3200-CH5-2x256MB[8-3-3-2.5] | Club-3D [CGA-8528TVD] Radeon 8500 128 MB [299/504-10087] | IBM 180GXP 80GB | Quantum Fireball 15GB | PIONEER DVD-ROM DVD-116 | SAMSUNG CD-R/RW SW-232B | FORTRON 300W | PHILIPS 170B | ...

  3. #3
    Registered User entium's Avatar
    Join Date: May:2003
    Location:
    Posts: 1,426
    Daisy link 13.
    EP43-DS3|E5200@3.33|ASUS EN9800GT HB /HTDI/ 512MB|2X2GB 800MHZ CL5 A-DATA|WD2500JB|NEC 4750A|BELINEA 1980S2

  4. #4
    engineer PhD Daisy's Avatar
    Join Date: Aug:2001
    Location:
    Posts: 468
    1750 (140x12.5) default v-core ( )
    .

    "Tbred and Palomino, connect AJ27 and nearby AH26 Vcc/Vcore socket holes with fine wire u-loop, replace CPU.
    Or connect the "bases" of socket pins AJ27 and AH26 with conductive ink. Note risk of accidental Vcore short circuit since no current limiting resistor as in 4:- below.
    4:- Tbred and Palomino, solder wire to socket AJ27, connect to Vcore thru 100 ohm resistor, (remotely switch/toggle"

    Entium , - AJ27 26 Palomino 100 ohm ?
    ECS 780G , AMD ATHLON64 4200+ X2 ,RAM 4x1GB PQI DDR2 800 ,Hitachi 500Gb, ATI TV Wndr, Fortron Blue Storm II 400W

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Copyright © 1999-2011 . .
iskamPC.com | mobility.BG | Bloody's Techblog | | 3D Vision Blog |