Results 1 to 9 of 9
Thread: HP DJ F4180
Hybrid View
-
22nd June 2010 22:30 #1Registered User
Join Date: Apr:2008
Location: .
Posts: 275
HP DJ F4180
! . ... ,e KONTRAX - N21. . . ( ) , , ... ? HP Solution centre "Carrige is stalled".
Last edited by 123; 22nd June 2010 at 22:37.
ASrock ALive NF6G-VSTA/ X2 240 2800mhz@3500mhz /ADATA 2GB 800@5-5-5-18 /WD 5000 AAKS 16MB 7200rpm/ Saphire 4670 DDR3 (rev.2)/LG H22 DVD-RW/350W PNF+ / Asus VW192s
-
22nd June 2010 22:57 #2
Resolving a Stalled Carriage Issue
Introduction
The printer carriage is the mechanism that supports the ink cartridge and allows it to move across the page during printing. Sometimes the carriage will become stuck or stalled in the middle of the printer, causing a grinding noise. Follow the steps below to release the carriage when this occurs.
Resetting the printer
1.Turn on the printer.
1.When the printer begins making the grinding noise or when the carriage moves to the middle, remove the power cord.
1.Make sure the ink cartridge is pushed all the way to the right.
1.Remove the ink cartridge.
1.Plug in the power cord.
1.Turn on the printer.
1.A black ink droplet will blink on the display screen of the HP and the message Ink cartridge missing will be displayed in the LCD of the HP. Insert the ink cartridge.
1.Print a test page.
1.If the issue is not resolved after completing the procedure outlined above, the printer will require service.ASUS N56VZ
-
23rd June 2010 07:26 #3Registered User
Join Date: Apr:2008
Location: .
Posts: 275
. . ? ?
ASrock ALive NF6G-VSTA/ X2 240 2800mhz@3500mhz /ADATA 2GB 800@5-5-5-18 /WD 5000 AAKS 16MB 7200rpm/ Saphire 4670 DDR3 (rev.2)/LG H22 DVD-RW/350W PNF+ / Asus VW192s
-
23rd June 2010 08:59 #4
.
:
1. /
2.
3. ...
,(http://www.arbikas.com) ..., .
-
23rd June 2010 21:22 #5Registered User
Join Date: Apr:2008
Location: .
Posts: 275
, ... . - () .
ASrock ALive NF6G-VSTA/ X2 240 2800mhz@3500mhz /ADATA 2GB 800@5-5-5-18 /WD 5000 AAKS 16MB 7200rpm/ Saphire 4670 DDR3 (rev.2)/LG H22 DVD-RW/350W PNF+ / Asus VW192s
-
24th June 2010 10:08 #6
-
24th June 2010 21:52 #7Registered User
Join Date: Apr:2008
Location: .
Posts: 275
-
25th June 2010 10:11 #8
-
25th June 2010 12:02 #9




Reply With Quote

, ...
5th May 2023, 14:20 in