Results 1 to 15 of 15
Hybrid View
-
8th July 2011 08:33 #1Registered User
Join Date: Jan:2008
Location: varna
Posts: 102
Asrock P4i45D+ Pentium 4, 2.80 GHz 1 Gb, pc3200, DDR400
,
- Asrock P4i45D+
- Intel Pentium 4 CPU, SL6WJ, 478 pin, 2.80 GHz, Bus Speed 800 MHz, L2 Cache Size: 512 KB
512 (2256)
DIMM1: Nanya 256 MB, PC2100 DDR SDRAM (2.5-3-3-6 @ 133 MHz) (2.0-2-2-5 @ 100 MHz)
DIMM2: A-DATA 256 MB PC3200 DDR SDRAM (3.0-4-4-8 @ 200 MHz) (2.5-4-4-7 @ 166 MHz)
1.86 GHz 133 MHz, 133 MHz ( 1:1), , 177 MHz ( 3:4).
ADATA, 1 Gb, pc3200, DDR400, 184 PIN DIMM1, - , , , , .
, overclocking mode, 2.80 GHz, 200 MHz ( ), 200 Hz .
CPU: Socket 478 for Intel Pentium 4/ Celeron (Prescott, Northwood,
Willimate) processor
Chipsets: North Bridge:
Intel 845D chipsets, standard FSB 400MHz,
supports FSB 533MHz / 800MHz at over-clocking mode
(see CAUTION 1),
with Hyper-Threading Technology ready (see CAUTION 2);
South Bridge:
Intel ICH2
Memory: 2 DDR DIMM Slots: DDR1 and DDR2
supports PC2100(DDR266), Max. 2GB
PC3200(DDR400) at overclocking mode, Max.1GB
(see CAUTION 1)
CAUTION!
1. Please check the table below for the memory support frequency and its
corresponding CPU FSB frequency.
CPU FSB Frequency Memory Support Frequency
800 DDR400*
533 DDR266
400 DDR266
*Please refer to the NOTE on page 7 for the details.
2. About the setting of Hyper Threading Technology, please check page 22
of User Manual in the Support CD.
3. While CPU overheat is detected, the system will automatically shutdown
Vcore. Please check if the CPU fan on the motherboard functions properly
before you resume the system. To improve heat dissipation, remember to
spray thermal grease between the CPU and the heatsink when you install
the PC system.
4. Do NOT use a 3.3V AGP card on P4i45D+s AGP slot!
It may cause permanent damage!
5. Power Management for USB 2.0 works fine under Microsoft Windows XP
SP1 / 2000 SP4. It may not work properly under Microsoft Windows 98/
ME. Please refer to Microsoft official document at
http://www.microsoft.com/whdc/hwdev/...B2support.mspx
6. Although P4i45D+ offers stepless control, it is not recommended to
perform over clocking. When the CPU frequency of P4i45D+ is set to
perform over clocking, its Memory clock will also be overclocked
proportionally. Frequencies other than the recommended CPU bus
frequencies may cause the instability of the system or damage the CPU
and the motherboard.
The Recommended Memory Modules lists for P4i45D+ motherboard.
FSB 800 MHz / DDR 400 Mode (DIMM1)
DRAM SIZE TYPE CELL CELL NO. SINGLE SIDE /VENDOR (MB) VENDOR DOUBLE SIDE
ADATA 512 DDR400 ADATA ADD8608A8A-58 DOUBLE SIDE
ADATA 256 DDR450 ADATA ADD8608A8A-4.58 SINGLE SIDE
APACER 256 DDR400 INFINEON HYB25D256800BT-5 SINGLE SIDE
APACER 256 DDR400 SAMSUNG K4H560838D-TCCC SINGLE SIDE
INFINEON 256 DDR400 INFINEON HYB25D256800BT-5 SINGLE SIDE
KINGMAX 256 DDR400 KINGMAX KDL3888P4EA-50 SINGLE SIDE
SAMSUNG 256 DDR400 SAMSUNG K4H560838E-TCC C SINGLE SIDE
TWINMOS 512 DDR400 M.tec TTD7608F8E50B DOUBLE SIDE
TWINMOS 256 DDR400 TWINMOS TMD7608F8E50B SINGLE SIDE
Since the memory types are changing rapidly,
CPU FSB Frequency 800 MHz ( 20014= 2.80 GHz) DDR400 ( 200 MHz) , , at overclocking mode.
, -, , .
-
8th July 2011 11:17 #2Registered User
Join Date: Jul:2011
Location: gr.Levski
Posts: 45
tankovbg cpu 133mhz (533fsb) mhz c Prime 95 blend test ( rama agp/pci 66/33mhz bios ). 10 15 min , ( 5mhz) , prime 95 5 6 .
Last edited by Fury; 8th July 2011 at 12:40.
-
8th July 2011 13:49 #3Registered User
Join Date: Jan:2008
Location: varna
Posts: 102
cpu- 133mhz , 133mhz 13314=1.86 , , 133 1:1 177 3:4, cpu- 133mhz 2256, Nanya 256 MB, PC2100 133mhz , PC3200 200mhz, cpu- 133mhz 1 , 512 , , ,
-
8th July 2011 14:13 #4Registered User
Join Date: Jul:2011
Location: gr.Levski
Posts: 45
Nanya 256 MB PC2100 PC3200 ,
-
8th July 2011 16:03 #5Registered User
Join Date: Jan:2008
Location: varna
Posts: 102
- Nanya 256 MB PC2100 A-DATA 256 MB PC3200, - , 133mhz (13314=1.86 ) Nanya 256 MB PC2100 133mhz, 1 1 PC3200 DDR400 200 mhz, 200 mhz 2.80 , - , A-DATA 256 MB PC3200 , , , , :
Advanced
Speed spectrum - disabled
CPU Host Frequency - Auto 200 MHz
Dram Frequency 200 MHz ( |
Flexibility Option - Disabled
Hyper Theading Technology - Auto
Chipset Configuration
AGP Aperture Size - 64 Mb
ICH Delayed Transaction - Disabled
SDRAM Cash Latency - Auto ( 2 2.5)
CPU Thermal Throttling - Auto
DRAM Thermal Managment - Disabled
AGP/PCI Frequency - 67,2 MHz, 33,6 MHz
Configure SDRAM Timing by SPD - Disabled
Resource Configuration
PCI Latency Timer (PCI Clocks) - 32
Primary Graphics adapter - PCI/AGP ( AGP/PCI )
Power
Suspend to RAM - Disabled
-
8th July 2011 17:42 #6Registered User
Join Date: Jul:2011
Location: gr.Levski
Posts: 45
133*14 (1862 mhz ) 1:1 fsb/ram ram- a 133mhz (266mhz ) Nanya 256 MB PC2100 , cpu ( 150*14 (2100mhz) 1;1 ram- a 150mhz 300mhz ) , . , ram 1 1
Last edited by Fury; 8th July 2011 at 18:20.
-
8th July 2011 18:35 #7Registered User
Join Date: Jan:2008
Location: varna
Posts: 102
, 2 Nanya A-DATA 256 MB PC3200 ADATA, 1 Gb, pc3200, DDR400, DIMM1, - , , , at overclocking mode Max.1GB,
, Nanya- 133mhz (266mhz ), .................
17714= 2.47 177 3:4
-
8th July 2011 18:42 #8Registered User
Join Date: Jul:2011
Location: gr.Levski
Posts: 45
ADATA 1 Gb pc3200 DDR400 ?
-
8th July 2011 19:30 #9Registered User
Join Date: Jan:2008
Location: varna
Posts: 102
ADATA 1 Gb pc3200 DDR400 , , , , overclocking mode , - 17714= 2.47 177 3:4, (. 1.8 512 ) (. 2.47 1 ), ............... , .
-
8th July 2011 19:48 #10Registered User
Join Date: Jul:2011
Location: gr.Levski
Posts: 45
:P 1 (p4 s478 prescott 24/7 3200@3900mhz , 1gb ram /7900gs 512mb ddr3 agp, asus p4p800 -deluxe 865 chipset
-
10th July 2011 09:44 #11Registered User
Join Date: Jan:2008
Location: varna
Posts: 102
Fury, , , :
FSB - 177 Mhz, 708 Mhz, 2.48 Ghz, 1 Gb, 177 Mhz, 354 Mhz, AGP/PCI Frequenci 67.2/33.6, , . Prime95, blend test , results.txt
[Sat Jul 09 13:35:44 2011]
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
[Sat Jul 09 13:41:36 2011]
FATAL ERROR: Resulting sum was -1.307113168673178e+016, expected: 3481385981616765
Hardware failure detected, consult stress.txt file.
, ,
-
10th July 2011 13:04 #12Registered User
Join Date: Jul:2011
Location: gr.Levski
Posts: 45
cpu- p4 60C,
-
10th July 2011 13:28 #13Registered User
Join Date: Jan:2008
Location: varna
Posts: 102
50 , 40C, Prime95 4, 25.11 build 2, , , .
. , Prime95 26.6.1 , - , .Last edited by tankovbg; 10th July 2011 at 16:31.
-
11th July 2011 17:47 #14
...
:
1. , , , , .
2. - - .
3. . 10 , ? , ? 2.80 .
. .
' -
845D ( 845 ) 800 . 865 875. , 800 . .
, , - 1 1 400. , 2 512 400, , , . 2 512 , .
, 4 512 , 533 . 2 512 .
.
.. 256 400 ? - 2800 , 800 , 400 , .Last edited by Leader; 11th July 2011 at 19:00. Reason: (?)
-
11th July 2011 20:49 #15Registered User
Join Date: Jan:2008
Location: varna
Posts: 102
, FSB - 177 Mhz, 708 Mhz, 2.48 Ghz, 1 Gb, 177 Mhz, 354 Mhz.
2.48 Ghz 1 Gb
1.88 Ghz 512 .
- , , .............. .




Reply With Quote
Lenovo ThinkPad 15 IdeaPad 15
5th May 2023, 22:16 in