Results 1 to 6 of 6
Thread: CANON MX300
Hybrid View
-
15th February 2013 14:34 #1Registered User
Join Date: Aug:2008
Location: Sofia
Posts: 133
-
15th February 2013 14:53 #2Modderhead
Join Date: Nov:2005
Location:
Posts: 4,469
, , , , - .
-
15th February 2013 15:12 #3Registered User
Join Date: Aug:2008
Location: Sofia
Posts: 133
, . . .
-
15th February 2013 16:59 #4Registered User
Join Date: Aug:2011
Location: @
Posts: 865
! , . .
1.Switch off the Canon MX300 and disconnect the power cable.
2.While press and hold the power button, Connect the power cable to electric socket.
3.While pressing the power button, press the Cancel/Stop button (red button).
4.Now release the power button and the printer turns into a kind of factory mode. Wait for 10 seconds until it says idle.
5.Press > (next button) once Shipping Mode 3″ then Press the OK button. Press OK again for without cleaning.
6.A test page will print.
7.Open the cover, like you are about to change the cartridges.
8.Disconnect the power cable again without switch off the printer.
9.Take out the both cartridges.
10.Close the cover.
11.Connect the power cable and turn on the printer.
12.Now just put the cartridges back and the ink level in the canon Pixma MX300 have full again.
-
15th February 2013 22:16 #5
-
15th February 2013 22:27 #6Registered User
Join Date: Aug:2011
Location: @
Posts: 865
"" ... Enjoy!




Reply With Quote

windwos 10
5th May 2023, 00:01 in Windows