Results 1 to 2 of 2
Thread: 2 - 7770 7790
Hybrid View
-
13th April 2013 12:55 #1Registered User
Join Date: Aug:2004
Location:
Posts: 3,638
2 - 7770 7790
, / crossfire! / .
, , , . .
:
SAPPHIRE. AMD 7790, SAPPHIRE.
device manager HD 7700 Series. , .
7790 . 7770 . 7790. . Nvidia . . OS ?
- .
. - , . , .
device manager other devices pci to pci bridge, ! . .... , crossfire.
:
, , , APU?Code:"Surround Display Feature This motherboard supports surround display upgrade. With the internal VGA output support (DVI-D, D-Sub and HDMI) and external add-on PCI Express VGA cards, you can easily enjoy the benefits of surround display feature. Please refer to the following steps to set up a surround display environment: 1. Install the PCI Express VGA cards on PCIE2 and PCIE4 slots. Please refer to page 22 for proper expansion card installation procedures for details. 2. Connect DVI-D monitor cable to DVI-D port on the I/O panel, connect D-Sub monitor cable to D-Sub port on the I/O panel, or connect HDMI monitor cable to HDMI port on the I/O panel. Then connect other monitor cables to the corresponding connectors of the add-on PCI Express VGA cards on PCIE2 and PCIE4 slots. 3. Boot your system. Press <F2> or <Del> to enter UEFI setup. Enter Share Memory option to adjust the memory capability to [32MB], [64MB], [128MB], [256MB] or [512MB] to enable the function of D-sub. Please make sure that the value you select is less than the total capability of the system memory. If you do not adjust the UEFI setup, the default value of Share Memory, [Auto], will disable D-Sub function when the add-on VGA card is inserted to this motherboard. 4. Install the onboard VGA driver and the add-on PCI Express VGA card driver to your system. If you have installed the drivers already, there is no need to install them again. 5. Set up a multi-monitor display."
onboard VGA. , , , , ... .Code:Multi Monitor Feature This motherboard supports multi monitor feature. With the internal VGA output support (DVI-D, D-Sub and HDMI), you can easily enjoy the benefits of multi monitor feature without installing any add-on VGA card to this motherboard. This motherboard also provides independent display controllers for DVI-D, D-Sub and HDMI to support multi VGA output so that DVI-D, D-sub and HDMI can drive same or different display contents. To enable multi monitor feature, please follow the below steps: 1. Connect DVI-D monitor cable to DVI-D port on the I/O panel, connect D-Sub monitor cable to D-Sub port on the I/O panel, or connect HDMI monitor cable to HDMI port on the I/O panel. 2. If you have installed onboard VGA driver from our support CD to your system already, you can freely enjoy the benefits of dual monitor function after your system boots. If you havent installed onboard VGA driver yet, please install onboard VGA driver from our support CD to your system and restart your computer.
ASUS TUF Gaming B550m plus | Ryzen 5 5600x | Noctua NH-U9S | 2x8GB Corsair Vengeance DDR4 3200 | Sapphire RX580 | AData XPG Gammix s50 lite 1Tb | 2Tb WD Black | 4Tb WD My Book | Seasonic 650W Platinum | LG 32UN880
-
13th April 2013 15:02 #2




Reply With Quote
, ...
05.05.23 ., 14:20 in