Results 1 to 6 of 6
Thread: Not Formatted WD HDD 2 TB - !
Hybrid View
-
18th May 2013 19:00 #1
-
18th May 2013 21:33 #2
CMD chkdsk F: /R.
-
18th May 2013 22:19 #3
:
C:\Documents and Settings\User>chkdsk F: /R
The type of the file system is RAW.
CHKDSK is not available for RAW drives.
Safe-mode?
-
19th May 2013 11:12 #4
. .
:
There are two places where we store file system information: the MBR partition Table and Volumes boot sector, When the file system information provided on these 2 sectors of disk is not good you may see chkdsk reporting raw file system (though the data is still there).
Ok try this one mount the drive as a slave inside the computer and see if you can repair the partition table:
Download the Windows version of TestDisk. http://www.cgsecurity.org/wiki/TestDisk
Unzip the downloaded file to your C: drive and open C:\testdisk-6.8\win > double click " testdisk_win" (the program doesn't have to installed).
A. At the first window select No Log and press the <Enter> key.
B. Select what drive to analyse, choose Proceed and <Enter>.
C. Select partition type Intel if its a PC.
D. Select Analyse then <Enter>. The drive/partition will be analysed.
E. Select Proceed at the next screen, then <Enter>.
F. Press Y if the partitions were created under Vista N if not.
G. TestDisk should say Structure OK. Choose the drive/partition to fix. Then press <Enter>.
H. Select Write and press <Enter>.
I. Press Y.
J. Press <Enter> and close TestDisk. Reboot the computer.




Reply With Quote
7th May 2023, 16:02 in PC