Results 1 to 7 of 7
Thread: hdd 3-
Hybrid View
-
1st February 2015 14:27 #1Registered User
Join Date: May:2008
Location: Sofia
Posts: 1,207
hdd 3-
,
3- /, hd tune () ( ), , , s.m.a.r.t. ( ok ), ?!, , mbr, , LBA 63xxxxx, - , windows, ntfs
. , :
lifetime hours: 16297
state: active or idle
type: uncorrectable error in data
details: at LBA = 0x00616361 = 63824233Last edited by dedaznam; 1st February 2015 at 14:44.
-
1st February 2015 15:16 #2
SMART- ? ?
-
1st February 2015 15:43 #3Registered User
Join Date: May:2008
Location: Sofia
Posts: 1,207
:

:
[HIDE=log]smartctl 6.0 2012-10-10 r3643 [i686-linux-3.5.6-pmagic] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ExcelStor Technology J8160S
Serial Number: PVC300Q40J5RPB
LU WWN Device Id: 0 000000 000000000
Firmware Version: P22OA70A
User Capacity: 164,696,555,520 bytes [164 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 1
Local Time is: Sun Feb 1 13:20:46 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2865) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 167 167 050 Pre-fail Offline - 168
3 Spin_Up_Time 0x0007 125 125 024 Pre-fail Always - 160 (Average 160)
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 4627
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 134 134 020 Pre-fail Offline - 32
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 16300
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 4485
192 Power-Off_Retract_Count 0x0032 096 096 000 Old_age Always - 4930
193 Load_Cycle_Count 0x0012 096 096 000 Old_age Always - 4930
194 Temperature_Celsius 0x0002 214 214 000 Old_age Always - 28 (Min/Max 1/56)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 45 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 45 occurred at disk power-on lifetime: 16299 hours (679 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 61 63 61 e0 Error: UNC 7 sectors at LBA = 0x00616361 = 6382433
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 60 63 61 e0 08 02:33:54.700 READ DMA
27 00 00 00 00 00 e0 08 02:33:54.700 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 0a 02:33:54.700 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 0a 02:33:54.700 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 02:33:54.700 READ NATIVE MAX ADDRESS EXT
Error 44 occurred at disk power-on lifetime: 16299 hours (679 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 61 63 61 e0 Error: UNC 7 sectors at LBA = 0x00616361 = 6382433
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 60 63 61 e0 08 02:33:49.800 READ DMA
27 00 00 00 00 00 e0 08 02:33:49.800 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 0a 02:33:49.800 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 0a 02:33:49.700 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 02:33:49.700 READ NATIVE MAX ADDRESS EXT
Error 43 occurred at disk power-on lifetime: 16299 hours (679 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 61 63 61 e0 Error: UNC 7 sectors at LBA = 0x00616361 = 6382433
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 60 63 61 e0 08 02:33:44.800 READ DMA
27 00 00 00 00 00 e0 08 02:33:44.800 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 0a 02:33:44.800 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 0a 02:33:44.800 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 02:33:44.800 READ NATIVE MAX ADDRESS EXT
Error 42 occurred at disk power-on lifetime: 16299 hours (679 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 61 63 61 e0 Error: UNC 7 sectors at LBA = 0x00616361 = 6382433
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 60 63 61 e0 08 02:33:39.900 READ DMA
c8 00 80 68 63 61 e0 08 02:33:39.900 READ DMA
27 00 00 00 00 00 e0 08 02:33:39.900 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 0a 02:33:39.900 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 0a 02:33:39.900 SET FEATURES [Set transfer mode]
Error 41 occurred at disk power-on lifetime: 16299 hours (679 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 61 63 61 e0 Error: UNC 7 sectors at LBA = 0x00616361 = 6382433
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 28 63 61 e0 08 02:33:35.000 READ DMA
c8 00 20 08 63 61 e0 08 02:33:35.000 READ DMA
c8 00 08 00 63 61 e0 08 02:33:35.000 READ DMA
27 00 00 00 00 00 e0 08 02:33:35.000 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 0a 02:33:35.000 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.[/HIDE]
, badblocks :
3189168
3189169
3189170
3189171
-
1st February 2015 15:51 #4
SMART- ? UNC - , .
-
1st February 2015 16:36 #5
:
1)
2) FULL wipe - low level format
3) HDD Regenerator 2011 - Tool , .
-
1st February 2015 17:11 #6Registered User
Join Date: May:2008
Location: Sofia
Posts: 1,207
, LBA 63xxxxx, , , , hiren's bootcd, hard disk sentinel extended self test, ,




Reply With Quote
windwos 10
5th May 2023, 00:01 in Windows