Results 1 to 9 of 9

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User bialk's Avatar
    Join Date: Dec:2004
    Location: Goce Delchev
    Posts: 84

    Pioneer A207R

    ?







    "Line input" , Sub out. , L+R ?
    Asus p5ld2|d805@>3.8 1.4v|sonictower+120 Vantec Stealth|2x512mb a-data ddr2-800@3-3-3-9 2.1v|GB NX73G128D/7300GS/128M|250gb/7200/8 Samsung SATA + 160 Maxtor SATA |SS2 (rev.2,6c)|Benq 1640|SB Audigy 2 NX|5.1 Luxeon|Fortron 400PNF|Belinea 102035W DVI-D

  2. #2
    Registered User iceto's Avatar
    Join Date: Jun:2005
    Location: .
    Posts: 1,892
    А защо не ползваш High level in?

    Sent from my Be Pro using Tapatalk
    Ryzen 5 3600 + b450m + RX 6600

  3. #3
    Κατα τον δαίμονα εαυτου Incubuss's Avatar
    Join Date: Nov:2006
    Location: Enclosure of the Aesir
    Posts: 791
    (Eltax Atomic 8.2 Users Manual) e :

    Installation
    There are two ways to install Your new subwoofer ; below we will describe how:

    1. From amplifier with pre out to subwoofer:

    Connect the power cord from the amplifier pre out to Line In on Your active subwoofer. Hereby the sound signal runs from amplifier subwoofer pre out to Your active subwoofer. (See Fig 1 on page 8)

    2. From amplifier speaker out to subwoofer:

    Connect the speaker cords from the amplifier speaker terminations to High Level In on Your active subwoofer. Make sure that the right channel on the amplifier is connected to the right channel on the subwoofer. Repeat the same check for the left channels. Next, connect the front speakers from High Level Out on Your active subwoofer. Make sure that the right channel on the subwoofer is connected to the right speaker. Repeat the same check for the left channel. (See Fig 2 on page 9)
    Some there be that shadows kiss.
    Such have but a shadow's bliss.
    \[T]/

  4. #4
    Registered User bialk's Avatar
    Join Date: Dec:2004
    Location: Goce Delchev
    Posts: 84
    ! !
    Asus p5ld2|d805@>3.8 1.4v|sonictower+120 Vantec Stealth|2x512mb a-data ddr2-800@3-3-3-9 2.1v|GB NX73G128D/7300GS/128M|250gb/7200/8 Samsung SATA + 160 Maxtor SATA |SS2 (rev.2,6c)|Benq 1640|SB Audigy 2 NX|5.1 Luxeon|Fortron 400PNF|Belinea 102035W DVI-D

  5. #5
    Registered User bialk's Avatar
    Join Date: Dec:2004
    Location: Goce Delchev
    Posts: 84
    high level in. - . High level out L+R ? .

    Last edited by bialk; 29th November 2015 at 11:19.
    Asus p5ld2|d805@>3.8 1.4v|sonictower+120 Vantec Stealth|2x512mb a-data ddr2-800@3-3-3-9 2.1v|GB NX73G128D/7300GS/128M|250gb/7200/8 Samsung SATA + 160 Maxtor SATA |SS2 (rev.2,6c)|Benq 1640|SB Audigy 2 NX|5.1 Luxeon|Fortron 400PNF|Belinea 102035W DVI-D

  6. #6
    Registered User
    Join Date: Mar:2006
    Location: Sofia/Varna
    Posts: 1,634
    .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Copyright © 1999-2011 . .
iskamPC.com | mobility.BG | Bloody's Techblog | | 3D Vision Blog |