Results 1 to 10 of 10
Thread: Openwrt wifi client bridge .
Hybrid View
-
3rd September 2022 09:20 #1
Openwrt wifi client bridge .
,
, , .
, 192.168.1.0/24 ( ) (- , ) unifi . 192.168.1.0/24. ( , , , ..) 2 2 , openwrt. Openwrt- , unify . , , , , .. - . , , - ( 192.168.1.0/24), , , .
https://openwrt.org/docs/guide-user/..._configuration
, - , , . , , - , , -.
!Last edited by tolostoi; 3rd September 2022 at 09:22.
-
3rd September 2022 11:04 #2
Wifi ? Wifi , .
Last edited by ianiovski; 3rd September 2022 at 11:07.
PSU: XFX XTR SERIES 650W 80 PLUS Gold MB:MSI X470 Gaming PRO CPU:AMD Ryzen 5 3600X, 35MB, 4.4 GHz with Arctic Freezer 34 eSports Red RAM:Kingston, HyperX Predator DDR4, 2x8GB, 3200MHz,RGB SSD:CRUCIAL MX500 250GB HDD:Toshiba 2TB VIDEO:Sapphire NITRO+ RADEON RX 580, 8 GB
MONITOR: ASUS VG27AQ1A
-
3rd September 2022 14:19 #3
, relay, , . , accept.
- (repeater) .Last edited by tolostoi; 3rd September 2022 at 14:25.
-
3rd September 2022 16:18 #4
-
3rd September 2022 19:49 #5
-
4th September 2022 08:37 #6
-
4th September 2022 11:00 #7Registered User
Join Date: Mar:2005
Location: Bulgaria
Posts: 732
If supported by both devices, consider using WDS, Layer 2 GRE tunnels (gretap), or mesh networking.
Using relayd as instructed in this article isn't guaranteed to work with all Openwrt compatible devices or wifi networks.
The most common problem is that the client router cannot pass the DHCP message between the main router and the client connected to the client router. Currently it seems to be the hardware/SOC limitation (related to MAC cloning?)
Instead of relayd it should be possible to use kmod-trelay, the only information about using it can be seen in its source code, if you used it successfully please add a section for it in this article.
WDS.Last edited by spp; 4th September 2022 at 11:01.
-
4th September 2022 11:28 #8
, , -, -. 192.168.1.1/24 (), - 192.168.1.8/24.
- - .
Openwrt TP-Link TL-W841N .Last edited by tolostoi; 4th September 2022 at 11:33.
-
5th September 2022 13:40 #9
-
5th September 2022 15:46 #10




Reply With Quote
- .


LOG
6th May 2023, 12:03 in