Results 1 to 16 of 16
Thread: HDD
Hybrid View
-
29th December 2004 12:16 #1Registered User
Join Date: Dec:2004
Location: London
Posts: 10
HDD
Seagate/120GB/ATA100 .
-
29th December 2004 12:38 #2
-
29th December 2004 12:40 #3Registered User
Join Date: Dec:2004
Location: London
Posts: 10
Motherboard Properties
Motherboard ID 03/28/2002-i815-W83627-6A69RPAOC-00
Motherboard Name Epox EP-3PTA
Front Side Bus Properties
Bus Type Intel GTL+
Bus Width 64-bit
Real Clock 100 MHz
Effective Clock 100 MHz
Bandwidth 800 MB/s
Chipset Bus Properties
Bus Type Intel Hub Interface
Bus Width 8-bit
Motherboard Physical Info
CPU Sockets/Slots 1
Expansion Slots 6 PCI, 1 AGP, 1 CNR
RAM Slots 3 DIMM
Integrated Devices Audio
Form Factor ATX
Motherboard Size 190 mm x 300 mm
Motherboard Chipset i815EP
-
29th December 2004 12:44 #4
-
29th December 2004 12:46 #5Registered User
Join Date: Dec:2004
Location: London
Posts: 10
-
29th December 2004 12:51 #6Registered User
Join Date: Dec:2004
Location: London
Posts: 10
-
29th December 2004 12:53 #7
-
29th December 2004 12:55 #8Registered User
Join Date: Dec:2004
Location: London
Posts: 10
-
29th December 2004 12:56 #9Registered User
Join Date: Dec:2004
Location: London
Posts: 10
-
29th December 2004 13:04 #10
txt :
http://files.driver.ru/drivers/1/E/E...os-install.txt
.
- epox
ftp://ftp.epox.com/downloads/BIOS/
- .
awdflash . 6.
-
29th December 2004 13:10 #11Registered User
Join Date: Dec:2004
Location: London
Posts: 10
The Boot Disk Method
1. Create a bootable floppy disk in accordance with the instructions
laid out in the manual of your particular operating system. This
bootable floppy needs to be able to boot to a DOS console capable of
executing normal MS-DOS batch and executable files.
2. Download and extract the xxxxxxxx.EXE file corresponding to your
model from the EPoX website to the floppy. It will self extract into
the above listed files.
3. Boot using your DOS floppy disk to the A:\> command prompt. At the
DOS command prompt type: UPDATE
4. The BIOS will automatically flash.
5. Reboot the machine.
6. After this, press DEL to enter the BIOS setup and select to "LOAD
OPTIMIZED DEFAULTS". After doing this select to "SAVE & EXIT."
Note: During the use of UPDATE a backup of your original BIOS
date/code will be saved in the same directory as the UPDATE file. It
will be called OLD.BIN and can be used with the restore
instructions below in case you need to revert back to the original
BIOS date/code.
-
29th December 2004 13:12 #12Registered User
Join Date: Dec:2004
Location: London
Posts: 10
xxxxxxxx.BIN BIOS binary file used by UPDATE.BAT.
-
29th December 2004 13:19 #13
-
29th December 2004 13:26 #14Registered User
Join Date: Dec:2004
Location: London
Posts: 10
-
29th December 2004 13:50 #15
-
29th December 2004 13:55 #16Registered User
Join Date: Dec:2004
Location: London
Posts: 10
10




Reply With Quote

windwos 10
5th May 2023, 00:01 in Windows