Results 1 to 7 of 7
Thread: USB Mass Storage Device -
Hybrid View
-
23rd February 2005 13:01 #1
USB Mass Storage Device -
USB flash-. ( Linux fdisk, Windows) . 128 mb, 63. . , . . util-, . .
We Who Are Not As Others!!!
-
23rd February 2005 13:18 #2... "" WinBoz... ... LinuH , ... WinBoz .
Originally Posted by karlos
-
* Last Words: Modding... clocking?! Never!... This is bullshit! ... well... maybe only this time... just a little...
* , ... , .
-
23rd February 2005 13:28 #3
Linux, , , (mke2fs; mkdosfs) 63mb.
fdisk:
-> p (print the partition table)
Disk /dev/sda: 67 MB, 67092480 bytes
3 heads, 43 sectors/track, 1015 cylinders
Units = cylinders of 129 * 512 = 66048 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 1015 65446 83 Linux
-> v (verify the partition table)
Expert command (m for help): v
147 unallocated sectorsWe Who Are Not As Others!!!
-
23rd February 2005 13:31 #4
. Windows , . . !
We Who Are Not As Others!!!
-
23rd February 2005 13:35 #5
-
23rd February 2005 13:50 #6! , !
Originally Posted by Private
We Who Are Not As Others!!!
-
23rd February 2005 13:22 #7
(),
.
recover Canyon:
------------------------------------------------------------------------
USB Flash Drive being detected as Security Device, data inaccessible. What should I do?
In certain conditions which are difficult to reproduce, USB Flash drive may suddenly stop working properly and begin to present itself to Windows XP as Security device, prompting for drivers which are not normally required. It is possible to restore drives functionality, but unfortunately any existing information on it will be lost.
Here is the recovery procedure:
* Download Canyon EZ Recovery utility (http://www.canyon-tech.com/files/Can...ANYON_2570.zip) and USB Flash Tools (http://www.canyon-tech.com/files/Can...UtilV10030.exe)
* Install both packages, reboot and run EZ Recovery tool
* Plug USB flash device into USB port and press Recover button
* Wait until process completes (it is possible that error message will be displayed at the end, ignore it and continue)
* Unplug the device and plug it back again as prompted
* Start USB Flash Tools, leave password field empty and press OK
* Press Format button and wait until process completes
* Exit from service utility and use your USB Flash drive normally
------------------------------------------------------------------------
, , .
.
!




Reply With Quote
windwos 10
05.05.23 ., 00:01 in Windows