Results 1 to 25 of 32
Thread: ?
Hybrid View
-
5th February 2006 23:28 #1
?
, ONKYO 7.1 dolby digital .. DVD/CD player Mitsubishi. , , - . MONSTER CABLE. , - . ?
<< :^) >>
-
13th February 2006 17:22 #2-
Join Date: Apr:2004
Location: Sf
Posts: 1,332
, ?
-
13th February 2006 17:28 #3
-
13th February 2006 19:09 #4
-
13th February 2006 19:27 #5
- . . - . , . Harman Kardon+DVD HK + Bose 5.1,koak MONSTER CABLE Hama
Last edited by antoni-1971; 13th February 2006 at 19:35.
Some motherfuckers are always trying to ice-skate uphill...
mini ITX : Lian Li A4 H2O/ 4080FE / 5800x3d / acool eisbear 240 / MSI MPG B550I GE / Timetec 32 / Corsair SF750
-
13th February 2006 23:24 #6
.
COAX - Coaxial cable - 75 ohm cable connected with RCA plugs
The coaxial interface uses 75 ohm COAX cable with RCA (phono) connectors. Standard audio interconnect cables will work for transmitting S/PDIF over short distances, but anything over 0.5 metre or so should use 75 ohm cable. The unloaded signal is nominally +/-0.5V and must be terminated with 75 ohms on the receiving end - the resulting signal is +/-0.25V when terminated. Naturally, audio "speciality" shops love to sell the "ultimate" cable for up to several hundred dollars, but a cable which you can easily make yourself should cost no more than $10-20 using good quality 75 ohm cable and connectors.
TOSLINK - An optical fibre connection
The TOSLINK interface uses optical fibre cables that plug into TOSLINK modules. These modules send or receive a TTL signal. Again, speciality cables will make no difference to the final sound quality, so don't be caught out by the glib sales person who insists that you have to spend serious money to get the best sound. Good quality fibre cables are essential however, as degradation of the optical signal will cause distortion, noise and even loss of signal in extreme cases.
It does not matter which type of hardware interface you use, the data is the same. The S/PDIF signal is independent of polarity, which means that you do not have to concern yourself with absolute polarity - this make things a lot easier.
-
9th January 2007 17:27 #7
-, . , , - , BGMan .
, 8 ( - ), 100 . 10 - 75 25 . 10 . , bat .ASUS M5A97, AMD FX4100@4GHz, Corsair Vengeance Red 8Gb DDR3 1600 MHz, Corsair SSD 60Gb, Gainward GF GTX285 1GB DDR3, FSP Bluestorm 500e, FlexScan S1932, BenQ MW516
-
11th January 2007 03:24 #8
-
11th January 2007 03:46 #9
-
11th January 2007 03:59 #10
-
11th January 2007 11:08 #11Registered User
Join Date: Oct:2005
Location: SZ
Posts: 502
- .
1. - . .. .
2. . -. - 5-10 . .
3. - . . . - -. .. 30 . 50 . , . . . .
4. - 96 48 Khz, "".
5. "" . , .
6. - "5 ~ 37 " , 5 5 . - ?Last edited by KTT; 11th January 2007 at 22:23.
-
14th January 2007 05:52 #12Registered User
Join Date: Sep:2005
Location: bulgaria
Posts: 245
- .

----------------------
, , , [Crosstalk], [] . . .. - , . / , .
SPDIF , . , . 192 . . 32- [time slot, - ]. 4- , 4- / [auxiliary], 20- [sample] 4 [control information]. [ ], time slot 28 [V - Validity bit], 29 [U - User bit], 30 [C - Channel status bit], 31 [P - Parity bit]. - ECC . CRC, parity checking , , . SPDIF . . , . 1) [mute sample], 2) [previous sample] 3) . . ? IEC 60958-3 . / .
For longer runs of errors, where a DSP or sophisticated analogue circuits are available, the best solution is
probably to repeat the first erroneous sample and fade that value to a mute (zero-value) at a rate which is
effectively inaudible. Fast fade up when the signal is restored should also be implemented.
, [fade] / . "fade up"- .
, , , , , . . , - . , .
-
14th January 2007 11:04 #13Registered User
Join Date: Oct:2005
Location: SZ
Posts: 502
bache_stefan,
, . . , .
" " / / - - ? "- " " ". " " . , .
SPDIF , / / .
, , Wikipedia - 1 . - 37 . /95 ./.
. - . . , , , .. .
, , . - .
", - ." . . " , ". 200 . , 1 . . - "" , . - " ...." , . . . . . , .
" - , ?
.Last edited by KTT; 14th January 2007 at 14:05.
-
14th January 2007 17:54 #14Registered User
Join Date: Sep:2005
Location: bulgaria
Posts: 245
, .
...
+ , SPDIF. .
...
"" ? ? , ? " ", ! [ : : "" .]
Originally Posted by KTT
: , . , , , . : , , ?
Originally Posted by KTT
, / .
: '" . . "" - , ? , ? , ?
: " - , ?" -
CD-ROM -. [ ]. CD-ROM, . SPDIF. CD-ROM- . ? , , , TTL 1Vpp 5Vpp. -. .
: "" ... "" - , . , . .
? - ? .
!
-
11th January 2007 17:51 #15




Reply With Quote

05.05.23 ., 14:20 in