Results 1 to 3 of 3
Hybrid View
-
3rd September 2006 10:18 #1
Fujitsu-Siemens , , soft FSB- ...
, ( , ), ...
^^
-
3rd September 2006 10:54 #2
-
4th September 2006 11:42 #3SiSoftware Sandra
Originally Posted by The Penalty
System
Manufacturer : FUJITSU SIEMENS
Model : SCENIC L
Serial Number : YBSX174953
ID : 58534259-39343731-30003335-86981305
System Chassis
Manufacturer : FUJITSU SIEMENS
Type : Mini Tower
Can be locked : Yes
Version : SCEL
Serial Number : YBSX174953
Asset Tag : YBSX174953
Boot-up State : Safe
Power State : Safe
Thermal State : Safe
Security State : External Interface Locked-out
Mainboard
Manufacturer : FUJITSU SIEMENS
MP Support : No
Model : D1219
Version : S26361-D1219
On-board Devices
SMsC SuperI/O : Other (Disabled)
Intel 815 : Video Adapter (Disabled)
System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 3
Maximum Installable Memory : 512MB
Bank 1 - DIMM-1 : DIMM Synchronous DRAM 256MB/64 @ 100Mt/s
Bank 2 - DIMM-2 : Empty
Bank 3 - DIMM-3 : Empty
Chipset 1
Model : Siemens PC Systeme GmBH 82815/G/EG/P/EP Solano Host-Hub Interface Bridge (GMCH/MCH B0-step)
Bus(es) : X-Bus AGP PCI IMB USB i2c/SMBus
Front Side Bus Speed : 1x 99MHz (99MHz data rate)
Maximum FSB Speed / Max Memory Speed : 1x 133MHz / 1x 133MHz
Width : 64-bit
IO Queue Depth : 4 request(s)
Chipset 1 Hub Interface
Type : Hub-Interface
Version : 1.00
Number of Ports : 1
Width : 8-bit
Full Duplex : Yes
Multiplier : 1/1x
Speed : 4x 66MHz (264MHz data rate)
Logical/Chipset 1 Memory Banks
Bank 0 : 256MB SDRAM 3-2-2-0
Speed : 1x 99MHz (99MHz data rate)
Multiplier : 1/1x
Width : 64-bit
Refresh Rate : 7.80s
Power Save Mode : Yes
Fixed Hole Present : No
APIC 1
Version : 2.00
Speed : 16MHz
Multiplier : 1/2x
Maximum Interrupts : 24
IRQ Handler Engaged : Yes
Enhanced Support : Yes
Memory Module 1
Manufacturer : Samsung
Model : M3 66S3253BTS-C75
Serial Number : 3516D209
Type : 256MB SDRAM
Technology : 8x(32Mx8)
Speed : PC133U 3-3-3-5
Version : 1.2
Date of Manufacture : 01 2065 .
Set Timing @ 133MHz : 3-3-3-5
Environment Monitor 1
Model : SMSC M10x/14x LPC
Mainboard Specific Support : No
AGP Bus(es) on Hub 1
Version : 2.00
Speed : 4x 66MHz (264MHz data rate)
Multiplier : 1/2x
Fast-Writes Enabled : No
Side Band Enabled : No
Side Band Support : Yes
Aperture Size : 64MB
PCI Bus(es) on Hub 1
Version : 2.20
Number of Bridges : 2
PCI Bus 0 : PCI (33MHz)
PCI Bus 2 : PCI (33MHz)
Multiplier : 1/3x
LPC Hub Controller 1
Model : Intel Corporation 82801BA (ICH2) LPC Interface Controller
ACPI Power Management Enabled : Yes
Delayed Transaction Enabled : Yes
LPC Legacy Controller 1
Type : SMSC LPC v1
Version : 59.00
Number of Enabled Devices : 6
USB Controller 1
Model : Siemens PC Systeme GmBH 82801BA/BAM (ICH2/ICH2-M) USB Universal Host Controller
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 2
Model : Siemens PC Systeme GmBH 82801BA/BAM (ICH2/ICH2-M) USB Universal Host Controller
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
System SMBus Controller 1
Model : Intel 801xx/63xx SMBus
Version : 1.01
Specification : 1.00
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
Speed : 100kHz
Expansion Slot(s)
AGP (1h) : AGP-4x 32-bit +3.3V PME Full-Length Used (Intel Corporation 82815/G/EG/P/EP Solano AGP/PCI Bridge (GMCH/MCH B0-step))
PCI-1 (2h) : PCI 32-bit +5V +3.3V PME Full-Length Available
PCI-2 (3h) : PCI 32-bit +5V +3.3V PME Full-Length Available
PCI-3 (4h) : PCI 32-bit +5V +3.3V PME Full-Length Used
PCI-4 (5h) : PCI 32-bit +5V +3.3V PME Full-Length Available
PCI-5 (6h) : PCI 32-bit +5V +3.3V PME Full-Length Available
ISA-1 (1h) : ISA 16-bit +5V Full-Length
Port Connector
SMsC - PS/2 Mouse : Mouse - None / PS/2
SMsC - Keyboard : Keyboard - None / PS/2
SMsC - Parallel : Parallel Port ECP/EPP - None / DB-25 pin female
SMsC - Serial-1 : Serial Port 16550 - None / DB-9 pin male
SMsC - Serial-2 : Serial Port 16550 - DB-15 pin female / None
SMsC - Floppy : None - Floppy Disk / None
ICH2 - Primary IDE : None - ATA / None
ICH2 - Secondary IDE : None - ATA / None
ICH2 - USB-1 : USB - None / USB
ICH2 - USB-2 : USB - None / USB
ICH2 - USB-3 : USB - 9 Pin Dual Inline / None
ICH2 - USB-4 : USB - 9 Pin Dual Inline / None
Intel 815 - Video : Video - None / DB-15 pin female
Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
SiSoftware Sandra
Processor
Model : Intel(R) Celeron(tm)
Speed : 895MHz
Performance Rating : PR1074 (estimated)
Type : Standard
Package : FC-PPGA Socket370
Rated Speed/FSB : 603MHz / 1x 67MHz
Multiplier : 9/1x
Generation : G6
Name : P6C (Coppermine128) Celeron 180nm 533MHz-1.1GHz 1.3-1.75V
Revision/Stepping : 8 / A (1)
Stepping Mask : cD0
Microcode : MU068A01
Core Voltage Rating : 1.750V
Maximum Physical / Virtual Addressing : 36-bit / 32-bit
Native Page Size : 4kB
Co-Processor (FPU)
Type : Built-in
Revision/Stepping : 8 / A (1)
Processor Cache(s)
Internal Data Cache : 16kB Synchronous, Write-Thru, 4-way set, 32 byte line size
Internal Instruction Cache : 16kB Synchronous, Write-Back, 4-way set, 32 byte line size
L2 On-board Cache : 128kB ECC Synchronous, Write-Back, 4-way set, 32 byte line size
L2 Cache Multiplier : 1/1x (895MHz)
Upgradeability
Socket/Slot : CPU
Upgrade Interface : ZIF Socket
Supported Speed(s) : 1.40GHz+
Environment Monitor 1
Model : SMSC M10x/14x LPC
Mainboard Specific Support : No
Power Rating(s)
CPU Core Power : 27W (estimated)
Sensors
Features
FPU - Co-Processor Built-in : Yes
VME - Virtual Mode Extensions : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
CX8 - Compare & Exchange Instruction : Yes
APIC - Local APIC Built-in : Yes
SEP - Fast System Call : Yes
MTRR - Memory Type Range Registers : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
CLF - Cache Line Flush Support : No
DS - Debug Trace & EMON Store : No
ACPI - Software Clock Control : No
(W)MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
SSE Technology : Yes
SSE2 Technology : No
SS - Self Snoop : No
HTT - Hyper-Threading Technology : No
TM - Thermal Monitor : No
PBE - Pending Break Enable : No
SSE3 Technology : No
MON - Monitor/MWait : No
DSCPL - CPL qualified Debug Store : No
EST - Enhanced SpeedStep Technology : No
TM2 - Thermal Monitor 2 : No
DAZ - Denormals Are Zero : No
Advanced Settings
L2 Cacheable Range : 64GB
L2 Cache Grouping : 1 bank(s)
L2 Cache Latency : 2 clock(s)
Data Error Checking : No
Low Power Mode : Yes
Fast Strings : Yes
IO Queue Depth : 8 request(s)
Machine Check Architecture Settings
Number of Reporting Banks : 5 bank(s)
Variable Range MTRR Settings
MTRR 0 : 00000000-0FFFFFFF (0MB-256MB) WB
Fixed Range MTRR Settings
MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) WP
MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) WP
MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) WP
MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) WP
MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) WP
MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) WP
MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) WP
MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) WP
MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) WP
MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) WP
MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) WP
MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) WP
MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) WP
MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) WP
MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) WP
MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) WP
MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) WP
MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) WP
MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) WP
MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) WP
MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) WP
MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) WP
MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) WP
MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) WP
MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WP
MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WP
MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WP
MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WP
MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WP
MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WP
MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WP
MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WP
MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WP
MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WP
MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WP
MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WP
MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WP
MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WP
MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WP
MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WP
PAT Settings
PAT 0 : WB
PAT 1 : WC
PAT 2 : UC-
PAT 3 : UC
PAT 4 : WB
PAT 5 : WC
PAT 6 : UC-
PAT 7 : UC
Performance Tips
Warning 227 : CPU FSB speed higher than rated FSB! Reduce FSB speed.
Warning 222 : CPU speed higher than rated speed! Reduce CPU speed.
Tip 210 : Mainboard supports faster CPUs, so the CPU can be upgraded when needed.
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
?




Reply With Quote
R9 280,
7th May 2023, 21:28 in