Results 1 to 5 of 5

Thread:

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User
    Join Date: Dec:2006
    Location: bulgaria
    Posts: 8

    .
    :
    2. . . .

  2. #2
    Registered User
    Join Date: Dec:2005
    Location: yvr
    Posts: 5,167
    - XP+SATA, 20 , 2 .

  3. #3
    Registered User
    Join Date: Dec:2006
    Location: bulgaria
    Posts: 8
    . . :
    -. . . . . ...

    1) Windows NT 4.0 and Windows 2000/XP Fresh Installation
    --------------------------------------------------------
    Follow the instructions in this section if you are performing a new
    installation of Windows NT 4.0 or Windows 2000/XP, and you wish to
    boot from a device attached to the SiI 3112 controller.
    1. Power off the system. Connect the hard drives to the SiI 3112
    controller and insert the controller into a PCI slot. Power up
    the system.
    2. Put your Windows NT/2000/XP CD into the CD-ROM/DVD drive, or
    the NT/2000/XP boot diskette #1 in the floppy drive if your
    system cannot boot from the CD.
    3. Press F6 for third party SCSI or driver installation at the beginning
    of text mode installation. Press 's' when setup asks if you want to
    specify an additional device, and insert the diskette labeled
    'Silicon Image SiI 3112 SATARaid Driver Installation Disk' .
    Press 'Enter' and select
    'Silicon Image SiI 3112 SATARaid Controller'
    4. Press 'Enter' to continue on with text mode setup.
    5. Follow the setup instructions to select your choice for
    partition and file system.
    6. After setup examines your disks, it will copy files to
    Windows 2000 installation folders and restart the system.
    The setup program will continue and finish the installation
    after restart.
    7. Wait until Windows 2000 finishes installing devices, regional
    settings, networking settings, components, and final set of
    tasks, reboot the system if it is required.
    8. See instructions in section 4 to verify controller was installed
    correctly.

    . .

    Last edited by robinl; 6th January 2007 at 23:32.

  4. #4
    Power buyer. SecondShoe's Avatar
    Join Date: Oct:2006
    Location: .
    Posts: 68
    Quote Originally Posted by robinl View Post
    2. . .
    : http://hddguru.com/content/en/softwa...gic-Boot-Disk/
    - -! - !

  5. #5
    Registered User
    Join Date: Dec:2005
    Location: yvr
    Posts: 5,167

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Copyright © 1999-2011 . .
iskamPC.com | mobility.BG | Bloody's Techblog | | 3D Vision Blog |